Table of Contents
Advertisement
36
www.aeg.com
3. After about 45 seconds,
(Access Point) appears on the
display.
The access point will be open for about 3
minutes.
As long as the appliance is
activated, it will keep trying
to connect with saved
credentials until the Wi-Fi is
deactivated or resets the
credentials.
4. Configure the "My AEG" app on your
smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
5. If the connectivity is configured, when
the programme information screen
returns, the indicator
display.
Every time you switch the
appliance on, the appliance
takes 45 seconds to connect
to the network automatically.
When the indicator
blinking the connection is
ready.
To switch the wireless connection off,
press and hold the Detergent
the Softener
seconds simultaneously until the first
acoustic signal:
display for 5 seconds.
is on the
stops
and
buttons for a few
appears on the
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Detergent
the Softener
buttons for at least 10
seconds simultaneously until the second
acoustic signal:
display.
11.3
Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a washing
programme remotely. This
function is deactivates when
door is open.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote
indicator
blinks on the display
for a few seconds.
2. Touch the Start/Pause button to
activate the Remote Start before the
indicator
stops blinking.
The indicators
and
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
and
appears on the
button and the
appear on the
Advertisement
Table of Contents
