AEG L7FBE48S User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L7FBE48S
  6. User manual
AEG L7FBE48S User Manual

AEG L7FBE48S User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L7FBE48S
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L7FBE48S

Summary of Contents for AEG L7FBE48S

  • Page 1 L7FBE48S User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    16. ACCESSORIES......................37 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    The ventilation opening in the base must not be • covered by a carpet, mat, or any floor covering. The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.

  • Page 5: Installation

    ENGLISH electrical ratings of the mains power • This appliance is for household use supply. only. • Do not use multi-plug adapters and • Follow the safety instructions on the extension cables. detergent packaging. • Make sure not to cause damage to •...
  • Page 6 3.1 Unpacking WARNING! Remove all the packaging and the transit bolts before installing the appliance. WARNING! Use the gloves. 1. Remove the external film. If 5. Carefully put down the appliance necessary, use a cutter. with the rear side on it.
  • Page 7 ENGLISH We recommend that you 9. Remove the power supply cable and keep the packaging and the the drain hose from the hose holders. transit bolts for any movement of the appliance. It is possible to see 3.2 Positioning and levelling water flowing from the drain hose.
  • Page 8 4. Connect the water inlet hose to the A correct adjustment of the cold water tap with 3/4" thread. appliance level prevents the vibration, noise and the movement of the appliance when in operation. When the machine is installed on a plinth or if a...
  • Page 9 ENGLISH You can extend the drain hose to maximum 400 cm. Contact the authorized service centre for the other drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.

  • Page 10: Product Description

    6. Position the hose directly to a built- in drain pipe in the room wall and tighten it with a clamp. 4. PRODUCT DESCRIPTION 4.1 Special features steam programmes remove odours and reduce creases in dry fabrics so Your new washing machine meets all they need little ironing.

  • Page 11: Control Panel

    ENGLISH Rating plate Mains cable Drain pump filter Transit bolts Feet for levelling the appliance Hose support Drain hose Inlet hose connection 5. CONTROL PANEL 5.1 Control panel description 11 10 Programme dial Delay start touch button (Delay Start) Display Eco touch button (Energy saving) Steam Plus touch button (Plus Steam) Time saving touch button (Time...
  • Page 12 5.2 Display Maximum load indicator. The indicator flashes during the laundry load estimation (refer to ProSense load detection paragraph) . Maximum laundry indicator. It blinks if the laundry amount exceeds the declared load. Door locked indicator. Delay start indicator.

  • Page 13: Dial And Buttons

    ENGLISH Spin speed indicator. Rinse hold indicator. Extra Silent indicator. Temperature indicator. The indicator appears when a cold wash is set. 6. DIAL AND BUTTONS When the display shows the indicators 6.1 On/Off , the appliance does not Pressing this button for a few seconds heat the water.
  • Page 14 This option is not You must drain the water to unlock available with a the door. temperature lower than As the programme is very quiet, it is 40 °C. suitable for use at night time when •...

  • Page 15: Programmes

    ENGLISH the selected delay time and the The display shows the indicator appliance begins the countdown. This option can also be used 6.8 Rinse to shorten the Steam programme duration. With this button you can select one of the following options: 6.10 Energy saving •...
  • Page 16 Programme Programme description White cotton and coloured cotton. Normal, heavy and light soil. Cottons Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, the programme Cottons at 60 °C and the programme Cottons at 40 °C with the option are respectively the «Standard 60°C cotton pro-...
  • Page 17 ENGLISH Programme Programme description Cotton and synthetic items lightly soiled or once worn. 20 min. - 3 kg Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation.
  • Page 18 Programme Default tempera- Maximum spin speed Maximum load ture Spin speed range Temperature range 40 °C 1200 rpm 3 kg 60 °C - Cold 1200 rpm - 400 rpm Synthetics 40 °C 1200 rpm 3 kg 40 °C - Cold...
  • Page 19 ENGLISH Programme options compatibility ■ ■ ■ ■ ■ ■ ■ ■ ■ Spin ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■ Extra Silent ■ ■ ■ ■ ■ ■ ■ Only drain ■ ■ ■ ■...

  • Page 20: Settings

    7.2 Woolmark Apparel Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the garments are wash- ed according to the instructions issued by the manufacturer of this washing machine.

  • Page 21: Before First Use

    ENGLISH simultaneously until the indicator This option increases slightly the programme duration. comes on/goes off above the indicator. To activate/deactivate this option touch button and the button 9. BEFORE FIRST USE 1. Make sure that all transit bolts have 5. Set and start a programme for cotton been removed from the appliance.
  • Page 22 10.3 Filling the detergent and additives 3. To use powder detergent, turn the flap up. Compartment for prewash phase, soak programme or stain remover. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives.
  • Page 23 ENGLISH With the flap in the In case a selection is not position DOWN: possible, no indicator comes • Do not use on and an acoustic signal gelatinous or thick sounds. liquid detergents. • Do not put more 10.6 Starting a programme liquid detergent than Touch the Start/Pause button to start the the limit shown on...
  • Page 24 Changing the delay start after this case, it will be not possible to guarantee the best washing results. the countdown has started About 20 minutes after the To change the delay start: programme start, the 1. Touch the Start/Pause button to programme duration could pause the appliance.
  • Page 25 ENGLISH 10.13 End of the programme The washing programme continues. When the programme has finished, the 10.11 Cancelling a running appliance stops automatically. The programme acoustic signals operate (if they are active). 1. Press the button On/Off to cancel the programme and to deactivate In the display all washing phase the appliance.

  • Page 26: Hints And Tips

    1. If necessary, touch the Spin button to • You do not use the appliance for 5 decrease the spin speed proposed minutes before you touch the Start/ by the appliance. Pause button. 2. Touch the Start/Pause button: Press the button On/Off to activate the appliance again.

  • Page 27: Care And Cleaning

    ENGLISH 11.2 Stubborn stains • Use the recommended detergents for the type and colour of the fabric, the For some stains, water and detergent is programme temperature and the not sufficient. level of soil. We recommend that you pre-treat these 11.4 Ecological hints stains before you put the items in the appliance.
  • Page 28 The regular detergents already contain 2. Run a short cotton programme at water softening agents, but we high temperature with empty drum recommend to run a cycle with empty and with a small quantity of powder drum and a descaling product detergent, in order to rinse out any occasionally.
  • Page 29 ENGLISH WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down Proceed as follows to clean the pump: 1. Open the pump cover. 4.
  • Page 30 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 5. When the bowl is full of water, turn the filter back and empty the container.
  • Page 31 ENGLISH 12.8 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter.

  • Page 32: Troubleshooting

    13. TROUBLESHOOTING WARNING! Refer to Safety chapters. 13.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre.
  • Page 33 ENGLISH Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged. The appliance does not •...
  • Page 34 Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes an "Installation instruction". unusual noise and vi- • Make sure that the packaging and/or the transit bolts are brates. removed. Refer to "Installation instruction".

  • Page 35: Consumption Values

    ENGLISH 2. Disconnect the mains plug from the 5. Take out the laundry and then close mains socket. the appliance door. 3. Open the filter flap. 6. Close the filter flap. 4. Pull twice the emergency unlock trigger downward and open the appliance door.

  • Page 36: Technical Data

    Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) 0.68 Standard 60°C cotton 0.49 Standard 60°C cotton 0.46 Standard 40°C cotton 1) At the end of spin phase.

  • Page 37: Accessories

    Read carefully the instructions supplied with the accessory. www.aeg.com/shop or from authorised dealer Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 16.2 Fixing plate kit...
  • Page 38 16.3 Stacking kit using the correct stacking kit manufactured and approved by AEG. Verify the compatible stacking kit by checking the depth of your appliances. The stacking kit can be used only with the appliances specified in the leaflet provided with the accessory.
  • Page 39 ENGLISH...
  • Page 40 www.aeg.com/shop...

Table of Contents