Table of Contents
Advertisement
Lighting area adjustment [G-LS]
—
Itis possible to adjust the lighting area by moving the lamp socket back
- and forth. Adjust the lighting area to allow easy viewing.
Attaching filters [C-DSLS]
Rotate and remove the filter cap at the end of
í
the lamp house and insert a filter. Use filters
ee
that have a diameter of 33 mm and a width of
>
1.5 ~ 2 mm.
` Filter cap
2
P-ICI2 Coaxial Episcopic Illuminator
Light guide mount
| Light guide clamp screw
Main body
==
Light guide
Fiber illuminator
|
Se
| Fiber illuminator (C-FI115 for
3
| 100/120V region and C-F1230
i for 230V region) available on
order is necessary for the
light source.
Read also the Instruction
Manual of the Fiber
Illuminator C-F1115/C-FI230.
Eyepiece tube
clamp screw
£
Incident section /
Magnification of the P-ICI2 Coaxial Episcopic Illuminator is 1.5X. Total
magnification is obtained by multiplying 1.5 by the total magnification of
the basic set of the microscope.
Note) Usable magnification for the P-1C12
Zoom
Coaxial Episcopic Illuminator is
een
HR Plan Apo 0.5X | 2.5X or higher
restricted.
Use the magnification
within the range shown in the right
HR Plan Apo IX
| 2.5X or higher
table. If the magnification out of the
| HR Plan Apo 1.6X | Not usable
specified range is used, uneven
Advertisement
Table of Contents
