Table of Contents
Advertisement
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Worn switch
•
Worn or damaged wires.
•
Full collection bag.
•
Any other unsafe condition.
Lubrication
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. DO NOT lubricate them.
Machine Storage
When the dust collector is not in use, unplug the
power cord from the power source. Place the
cord away from potential damage sources, such
as high traffic areas, sharp objects, heat sources,
harsh chemicals, water, damp areas, etc.
-24-
Emptying/Replacing
Bags
Empty or replace the collection bag when it is
about
⁄
full. Replace the filter bag on a regular
1
2
basis to allow the machine to operate at a much
higher level of efficiency. Always wear the appro-
priate respirator or dust mask and safety glasses
during this process, as small dust particles can
escape the bags, causing them to become air-
borne and easily inhaled. This microscopic air-
borne dust is unsafe to breathe and can serious
health problems.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when changing collection or filter bags.
To empty/replace bags:
1.
DISCONNECT MACHINE FROM POWER!
2.
Put on safety glasses and respirator.
3.
Release bag clamp securing bag, unhook
bag from support rods, then remove bag from
collector.
4.
Empty bag or securely close top and safely
dispose of it according to local and federal
standards.
5.
Re-install bag or replace it with a new one.
Model G8027 (Mfd. Since 09/23)
Advertisement
Table of Contents
