Table of Contents
Advertisement
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged filter bag.
•
Worn or damaged wires.
•
Full filter bag.
•
Any other unsafe condition.
Weekly Maintenance
•
Clean/vacuum dust buildup off machine body
and motor.
Lubrication
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. Do not lubricate them.
-24-
Machine Storage
When the dust collector is not in use, unplug the
power cord from the power source. Place the
cord away from potential damage sources, such
as high traffic areas, sharp objects, heat sources,
harsh chemicals, water, damp areas, etc.
Emptying Filter Bag
Always empty the filter bag when it is about
full. Emptying the filter bag allows the machine
to operate at a much higher level of efficiency.
Always wear the appropriate respirator or dust
mask and safety glasses when emptying the filter
bag. Small dust particles can escape the bag dur-
ing emptying, causing them to become airborne
and easily inhaled. This microscopic airborne dust
is extremely unhealthy to breathe and can cause
serious health problems.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when emptying or replacing filter bag.
To empty filter bag:
DISCONNECT MACHINE FROM POWER!
1.
Unzip bag over suitable container located
2.
away from open flames or pilot lights.
Zip bag shut.
3.
Model T33587 (Mfd. Since 09/23)
⁄
1
2
Advertisement
Table of Contents
