Key Switch; Traction Pedals; Mow/Transport Slide - Toro Reelmaster 3100-D Operator's Manual

Key Switch

Traction Pedals

Mow/Transport Slide

Product Overview: Controls
G444247
G450112
G444501
Page 4–2
Off
Run/preheat the engine
Note:
When the key is in the R
P position, the glow plug
REHEAT
energizes and the indicator light
illuminates for approximately 7
seconds.
Start
Move forward—press the forward
traction pedal.
Move backward (or to assist in
stopping when moving forward)—press
the reverse traction pedal.
Allow the pedals to move or
move them to the Neutral
position to stop the machine.
T —move the slide to this
RANSPORT
position when transporting the machine.
Note:
The cutting units do not lower
when the slide is in the T
RANSPORT
position.
M —move the slide to this
OW
position to operate the cutting units.
/
UN
3466-297 A