Super Bass - Pioneer VSX-605S Operating Instructions Manual

[ S C aa conel
GUI
ENTER button.
NOTE:
[RECEIVER CONTROL BUTTONS __
— == Bei eA eae a ae
@ The buttons in the following explanation are the receiver
operation button indications common to all function displays.
{The illustration shows LD operation indications.)
{Figure 1: Main Menu display)
> SURR MODE {Surround Mode):
Switches between the three SFC modes and the DOLBY PRO
LOGIC mode as follows.
[ DOLBY PRO LOGIC SURROUND —» STUDIO S|
oO
FF <+— ARENA <— SIMULATED SURROUND
The selected mode is displayed on the right of the function
indications.
@ 3CH LOGIC:
Switches DOLBY 3CH LOGIC ON/OFF.
When ON, "3CH LOGIC" is displayed on the right of the function
indications.
@ SUPER BASS:
Switches SUPER BASS ON/OFF.
When ON, "SUPER BASS" is displayed on the right of the
function indications.
24
<ARB7059>
(Figure 2: Sub Menu display)
(@ SURR EDIT (Surround Edit):
Press to make adjustments such as level setting for the currently
selected surround mode or DOLBY 3CH LOGIC.
When you press this button, the display changes to SURROUND
EDIT indications.
NOTE:
You cannot press this button when the surround mode or DOLBY
3CH LOGIC is OFF.
@) SET UP:
Press this button and the display changes to the SET UP MENU.
(See pages 30, 31)
® SYSTEM OFF
Switches power to this unit, the TV, and the currently selected
function OFF.
NOTE:
When you press the SYSTEM OFF button, power to components
not made by Pioneer switches ON if power to these components
was already switched OFF.
@ NEXT button:
Switches between Main Menu display (Figure 1) and Sub Menu
display (Figure 2).