Safety Instructions; Machine Compliance - Carrier AQUASNAP 30WI Installation, Operation And Maintenance Instructions

Heat pumps and liquid coolers with water cooled condenser
Hide thumbs Also See for AQUASNAP 30WI:
Table of Contents

Advertisement

3 - RECEIPT OF GOODS
Make sure this information matches that on the order.
Markings (name plate, punch marks, labels) must remain visible. They must not be altered, removed or modified.
Key:
- Désignation/Description : Unit type.
- An(Year) : Year of manufacture.
- N° série/Serial Nbr :  Production  number.  (to  be  quoted  in  all 
correspondence)
- Refrigerant : Type of refrigerant.
- Refrigerant kg / TeqCO
of CO
equivalent.
2
- BP/LP Mini / PSM/MOP : For the low pressure circuit:
- BP/LP. Mini = Minimum operating pressure in bar.
- PSM/MOP = Maximum standard pressure in bar (SP according 
to PED 2014/68/EU).
- HP Maxi PSM/MOP : For the high pressure circuit:
- HP. Maxi = Maximum operating pressure in bar.
- PSM/MOP = Maximum standard pressure in bar (SP according to PED 2014/68/EU).
- kW Absorbee/Input kW : Power input in kW.
- Tension/Voltage : Power supply.
- Intensite/Current A : Nominal current in A.
- Pression/Pressure Test : See "Pressure and temperature" section on the previous page.
- Service/Working kg : Operating weight of the unit, in kg.
- Temperatures Min/Max : See "Pressure and temperature" section on the previous page.
- IP : Machine electrical protection rating.
- No CE : Notified Body number.
 Please include the identification number in all correspondence.

4 - SAFETY INSTRUCTIONS

To avoid any risk of accident during installation, start-up and adjustments, the following equipment specifics must be taken into account:
- Pressurised refrigerating circuits
- Presence of refrigerant
- Presence of electrical voltage
Only experienced and qualified persons may work on such equipment.
The recommendations and instructions in this manual and on each drawing provided with the unit must be followed.
In  the  case  of  units  with  pressure  equipment  or  components,  we  recommend  that  you  contact  your  professional  organisation  for 
information on the regulations that apply to operators or owners of pressure equipment or components. The specifications of this 
pressure equipment or these pressure components are given on the name plates or in the regulatory documentation provided with the 
product.
A fire protection device is fitted as standard on all units.
IMPORTANT: Make sure the main disconnect switch in the unit's electrical panel is in the OFF position before working on the unit.

5 - MACHINE COMPLIANCE

Refer to the document entitled "Declaration of conformity" supplied with your equipment.
: Refrigerant content in kg and in tonnes 
2
Ref. produit/Item Nbr
3025277.423727
An(Year)
N. Serie/Serial Nbr
No Produit
02438040/0001
Refrigerant
kW Absorbee/Imput kW
R410A
Refrigerant kg / TeqCO2
Tension/Voltage
13.5 + 14.0 / 28.2+29.2
BP/LP Mini
PSM/MOP
Intensite/Current A
2.5 BAR / 29.5 BAR
HP Maxi PSM/MOP
Pression/Pressure Test
42 BAR / 42 BAR
PT=3XPS CF NOTICE
Contient des gaz fluorés à effet de serre / Contains fluorinated greenhouse gases
CARRIER SCS
Rte de Thil
01122 Montluel - France
Tél.: (33) 4 72 25 21 21
Designation/Description
30WI 1200V
Service/Working
kg
46.6
1088
Temperature Min/Max
3 50HZ 400V
CF NOTICE
IP
140
21
No CE
0060
M ad e in Fr an c e
5

Advertisement

Table of Contents
loading

Table of Contents