Table of Contents
Advertisement
English
is entered.
The cursor will blink in the position where letters are entered.
Direct Alphabet Input
Button to press
# Times pressed
1
1
2
3
2
5 Continue steps 3 and 4 until all the characters are chosen for
the name.
You can enter up to 8 characters for each name.
at
6 © Assigning Names
Press the NAME.S button on the unit or'the OK button on
the remote.
'
The name of the station is stored in memory, and the Station
Name Preset mode ends.
¢ Assigning Name and Storing Frequency with Station Preset
Memory
;
:
Hold down the desired preset button for at least two
seconds.
The name of the station is stored and the frequency for the
current station is stored in the selected preset button. The
Station Name Preset mode ends.
;
Also, if you make no input for 10 seconds, the name will be
stored up to the point that you have entered, and the mode
ends.
* You can assign names to up to 18 FM stations and 16 AM
stations.
+ All the station names will be erased if you press the RESET
button.
i
+ lf you want to change the name of a station, first display the
name of the station (following steps 1 and 2 above), then
change the letter(s) that you want by following steps 3 and 4.
Advertisement
Table of Contents
