Miele PTD 901 Quick Start Manual page 30

Hide thumbs Also See for PTD 901:

Table of Contents

Available languages

English

3 Commissioning

Commissioning

3.1 Before working with the warewasher for the first time

Arrange for the warewasher to be set up by an authorised service technician or by

your dealer.

Arrange for the warewasher to be connected by authorised technicians according to

the locally applicable standards and regulations (water, waste water, electrical sys-

tem). The water and electrical connections are described in the operating instructions.

After connecting the water and the power properly, contact the relevant Miele dealer-

ship or your dealer to arrange initial commissioning of the warewasher. Arrange for the

operator and operating personnel to be trained in operating the warewasher.

3.2 Checking for completeness

Note: Ensure that there is always enough detergent and rinse aid available to

achieve an optimum wash result.

12019630/02; 2023-07

Quick guide PTD 901

Table of Contents

Ptd 901 eco Ptd 901 liftPtd 901 lift ecoPtd 901 lift dosPtd 901 wes dos ecoPtd 901 wes dos ... Show all