Miele PTD 901 Quick Start Manual page 25

Automatic hood start
Closing the hood automatically starts a washing programme. The automatic hood start
can be deactivated by an authorised service technician (P572). Every washing pro-
gramme will then need to be started by pressing the start button.
PTD 901 LIFT (device version) – automatic hood
The hood opens automatically after every washing programme and can be closed again
using the start button on the front cover.
PTD 901 ECO (device version)
Note: Cold water connection required.
In the ECO module above the warewasher there is a fan motor and heat exchanger. The
fan motor extracts the moist and warm air (= vapours) out of the washing compartment
and transfers the generated energy to the cold inlet water via a heat exchanger. A waste
water heat exchanger provides an additional energy gain.
Integral water softener (optional)
Warewasher with built-in salt container for regeneration salt. The regeneration salt softens
the inlet water and thus prevents a build-up of limescale inside the warewasher and on the
items being washed.
2.3 Display
Operating the display is similar to operating a smartphone. The display responds to light
touches. Therefore, only operate the display with your fingers and do not use any sharp
objects. You can also operate the display and start button with wet hands or rubber
gloves.
Item Description
1 Washing programmes
2 Selection of additional programmes
3 Display area for error pictograms
4 Start button
Quick guide PTD 901
1 2
|
12019630/02; 2023-07
2 Machine description
3 4
|
|
English
25