National Instruments PCI-6281 User Manual page 209

Appendix A Module/Device-Specific Information
Table A-25. Default NI-DAQmx Counter/Timer Pins (Continued)
Counter/Timer Signal
CTR 0 AUX
CTR 0 OUT
CTR 1 SRC
CTR 1 GATE
CTR 1 AUX
CTR 1 OUT
FREQ OUT
Note For a detailed description of each signal, refer to the
Descriptions
Note For more information about default NI-DAQmx counter inputs, refer to
Connecting Counter Signals in the NI-DAQmx Help or the LabVIEW Help.
USB-6259 Mass Termination Important Links
The following list contains links specific to your DAQ device:
• Specifications—Refer to the NI 6259 Specifications for more detailed information about
the USB-6259 Mass Termination device.
LED Patterns—Refer to the
•
Information, for information about the USB-6259 Mass Termination LEDs.
Fuse Replacement—Refer to the
•
Getting Started, for information about replacing the fuse on the USB-6259 Mass
Termination.
Accessory and Cabling Options—Refer to the
•
section of Chapter 2,
A-52 | ni.com
CTR 0 A
CTR 0 Z
CTR 0 B
CTR 1 A
CTR 1 Z
CTR 1 B
section of Chapter 3,
LED Patterns
DAQ System
Default Connector 0 Pin Number (Name)
Connector and LED
section of Chapter 3,
USB Device Fuse Replacement
68-Pin M Series Cables and Accessories
Overview, for more information.
45 (PFI 10)
2 (PFI 12)
37 (PFI 8)
3 (PFI 9)
45 (PFI 10)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
40 (PFI 13)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
1 (PFI 14)
I/O Connector Signal
Information.
Connector and LED
section of Chapter 1,