Beko BBIM13400DXMPSE User Manual page 38

• Before using the pyrolysis function, re-
move all accessories, the telescopic
shelf and the side shelves (if any). If not
removed, the accessories and side wire
shelves will be damaged.
• If your product has a pyro proof access-
ory (resistant to high temperature self-
cleaning), you do not need to remove
these accessories from the oven.
Whether your accessories are pyro-proof
or not is specified in the accessories sec-
tion. If not specified, your accessories
are not resistant to high temperatures. It
must be removed from the oven before
cleaning to avoid damage.
• Do not clean the door seal. The glass
fiber seal is very delicate and easily dam-
aged. If the door seal is damaged, re-
place it with a new one from an author-
ized service.
To start the pyrolysis function:
1. Remove all accessories inside the oven.
In the models with wire shelves, remem-
ber to remove the wire shelf.
2. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy
cloth.
3. Select the "Pyrolysis" or "Pyrolysis - eco-
nomy mode" function according to the
dirtiness condition of your oven. If your
oven is not very dirty, we recommend
using the "Pyrolysis - economy mode"
function. This function takes less time
than the "Pyrolysisvariable" function. If
the oven is very dirty, the "Pyrolysis -
economy mode" function may not be
sufficient. In this case, clean it by the
"Pyrolysis" function.
4. Turn the oven on by touching the
5. Activate the lower row operating func-
tions by touching the "Extra function ac-
tivation" on the function display.
6. Touch on "Pyrolysis" on the bottom row
on the function display.
7. "HI" pyrolysis level and "02:00" time ap-
pear on the display.
8. Start cleaning by touching the
ð Cleaning starts and the self-clean-
ing time appears on the display.
This time is unchangeable.
9. When the oven reaches a certain tem-
perature after the pyrolysis process
starts, the
the timer display and the oven door can-
not be opened. Do not force the handle
to unlock the door until the cleaning pro-
cess is finished and the lock symbol dis-
appears from the display.
10.When the cleaning process is finished,
"End" appears on the display. Turn off
key.
the oven by touching the
11.When the
display, remove the remaining deposits
with vinegar water.
EN / 38
lock symbol appears on
key.
symbol disappears on the
key.