Memory Protect; Cartridge Memory Management - Peavey DPM V3 Owner's Manual

for the best contrast for your particular viewing angle.
1. Select the GLOBAL View/Protect page.
2. Press the Right or Left Arrow until the View parameter flashes.
3. Select the desired viewing angle. O works best for straight-on viewing. More
negative numbers optimize the viewing angle if you're looking at the DPM V3
from below; more positive numbers optimize the viewing angle if you're looking
at the DPM V3 from above.
2.1d Memory Protect (Off or On)
1. Select the GLOBAL View/Protect page.
2. Press the Right or Left Arrow until the Protect parameter flashes.
3. Select OFF or ON.
It's worth mentioning again that MIDI and Global parameters are always
remembered and are not affected by the Memory Protect status. Memory protect
affects the programs (internal and cartridge) only.
2.1e Cartridge Memory Management
1. Select the CART Task page.
2. Press the Right or Left Arrow until the lower line flashes.
3. Use the Up/Down buttons to select from the following choices:
LOAD>BANK 1 Loads the cartridge data into the first 100 programs (000-099).
LOAD>BANK 2 Loads the cartridge data into the second 100 programs
(100-199).
2.2