Ordinary Tape Recording; Tape Dubbing (Tape 2 -" Tape 1); Recording Sound With Equalizer Effect Applied - Kenwood KC-991 Instruction Manual

Operating instructions
INPUT SELECTOR knob
EQ. REC key TAPE2 (MONITOR) key
■Ordinary tape recording
*| Select the source to be recorded.
Set cassette deck 1 or 2 in the record-pause
mode.
i When the EQ.REC key is pressed, the sound can be
recorded together with the equalizer effect.
Play the source component to be recorded,
1 and start recording it on the cassette deck.
i |n case of tape dubbing (TAPE 1—>TAPE 2), play the cas¬
sette deck connected to TAPE 1 and record on the cas¬
sette deck connected to TAPE 2.
■Tape dubbing (TAPE2 -» TAPED
^ Press the TAPE 2 key.
V E R
2 Select a source other than TAPE 1.
Play cassette deck 2 and start recording on
1 cassette deck 1.
• Do not select TAPE 1 while dubbing.
• When the EQ.REC key is pressed, the sound can be
recorded together with the equalizer effect.
■ Recording sound with equalizer effect applied (TAPE 1 only)
Select the source to be recorded.
o.
3 Press the EQ.REC key.
'ft
!:sr^
Lights up
2 Create a desired equalizer pattern.
• Create an equalizer pattern referring to "Graphic equalizer
operation" on pages 13 and 14.
• The equalizer pattern recalled using the M.CALL key can
also be used in recording.
• The EQ. indicator lights up on the bottom right of the dis¬
play.
4 Start recording.
-J
12
KC-991 (En)