Table of Contents
Advertisement
System connections
Make connection as shown below. When connecting the related system components, refer also to the instruction
manuals of the related components.
Do not plug in the power lead until all connections are completed.
Tape deck 1
Tape deck 2 or surround processor
Notes:
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connec¬
tion cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
KC-991 (En)
7
Advertisement
Table of Contents
