Digital-In - JVC AV-48P776 User Manual

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVl 480p picture signal is being displayed on the screen. There are two types of
HDMN80p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
(_ Press the MENU button
J.V To DIGITAL-IN
• • To enter
J.V To select AUTO, SIZE1 or SIZE2
Press the MENU button to finish
PREVIOUS
D{GITAL IN_ AUTO
DIGITAL_IN AUDIO 4 DIGITAL _T
Notes:
• The DIGITAL-IN menu can only be displayed when a HDMI or 480p picture signal is input to
the Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE!" or "SIZE2" automatically.
This feature is used if you have a DTV or HDMI compatible component connected to your TV.
(_ Press the MENU button
J.V To DIGITAL-IN AUDIO
• • To select ANALOG, DIGITAL or AUTO
Press the Menu button when finished
Notes:
_NE_T PAGE (1/5)
• If your DTV or HDMI component is capable of digital
audio and video, choose DIGITAL. If your DTV or HDMI component is capable of analog
audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page
68.
m