Table of Contents
Advertisement
Onscreen Menus
Digital-In
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
π †
è
π †
Notes:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.
Digital-in Audio
This feature is used if you have a DTV or HDMI compatible component connected to your
monitor.
π †
è
Notes:
• If you connect the HDMI device to the HDMI 1, choose
DIGITAL. If you connect the DVI device to the HDMI 1, choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select AUTO, the monitor will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
44
Downloaded from
www.Manualslib.com
Press the M
button
ENU
To DIGITAL-IN
To enter
To select AUTO, SIZE1 or SIZE2
Press the M
button to finish
ENU
Press the M
button
ENU
To DIGITAL-IN AUDIO
To select ANALOG, DIGITAL or AUTO
Press the Menu button when fi nished
manuals search engine
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT
OPERATE
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT
OPERATE
SIZE1
DIGITAL
(1/4)
EXIT
MENU
SIZE1
DIGITAL
(1/4)
EXIT
MENU
Advertisement
Table of Contents
