Volvo Penta 4.3GL Instruction Book page 18

16
0
I
II
6. Fuses, 8 A
Fuses for the starter function and system voltage. To
change fuses: Press the button and turn anti-
clockwise.
IMPORTANT Always carry extra fuses on
board.
7. Ignition switch
The ignition switch has three positions (these
positions are not marked):
0 = The key can be inserted and taken out.
I = Operating and running position. System voltage
connected
II = Starter position (spring-loaded). The starter
motor is engaged.
IMPORTANT Read the starting instructions in
the chapter Starting the engine .
The ignition keys are marked with a key code used
when ordering extra keys. Make a note of this key
code so that keys can be ordered if the old keys get
lost. Keep the code in a safe place where
unauthorized persons do not have access to it.