Replacing The Battery; Placing Slim Size Remote Controller - Toshiba Qosmio F55-Q502 User Manual

Qosmio F50 Series
3. Close the battery cover. Close the cover securely until it clicks.

Replacing the battery

1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.
4. Close the battery cover. Close the cover securely until it clicks.

Placing Slim size remote controller

Inserting a Slim size remote controller
To insert a Slim size remote controller, follow the steps as detailed below:
1. Make sure the ExpressCard slot is empty.
2. Set the front side upward and insert a Slim size remote controller.
3. Press a Slim size remote controller gently to ensure a firm connection is
made.
8-14
Battery cover
Figure 8-11 Closing the battery cover
Stopper
Figure 8-12 Removing the batteries
Figure 8-13 Inserting a Slim size remote controller
Battery
ExpressCard slot
Slim size remote
controller
User's Manual