Advanced Settings; Default Settings - D-Link DIR-822 User Manual

Section 3 - Installation
These settings allow advanced users to quickly setup the router with a default IPv4 DHCP
WAN and a simple SSID. Once configured, the user is taken directly to the full UI and can
configure the router according to Configuration on page 19.
Defaults
Enter a new password for the administrator account. You will need
User's interface
to enter this password whenever you configure the router using a
Password:
web browser.
Confirm your new password for the administrator account.
Password
Confirmation:
Create a name for your 2.4 GHz wireless network using up to 32
Network name 2.4
characters.
GHz (SSID):
Create a name for your 5 GHz wireless network using up to 32
Network name 5
characters.
GHz (SSID):
Click Apply to proceed to the router according to Configuration on
page 19.
D-Link DIR-822 User Manual

Advanced Settings

Default Settings

18