Table of Contents
Advertisement
9.2 Draining residual water
Before emptying the residual water, switch the appliance off and
unplug it from the mains socket. Remove the plinth. Place a
container beneath it.
1.
Open the filter but do not remove it completely. Slowly turn the filter
counterclockwise until the water begins to drain out.
2.
Wait until all the water has drained.
3.
Now unscrew the filter completely and remove it.
4.
Tilt the appliance forward carefully to allow the water to flow out.
5.
Refit the filter and screw it in clockwise as far as it will go.
6.
Refit the plinth.
Before using the washing machine again:
1.
Pour approx. 1 litre of water into the detergent drawer to reactivate the
"Cotton Eco ".
2.
Plug in the appliance once again.
9.3 Care and maintenance
Appliance exterior and control panel
Can be washed down with a soft, damp cloth.
A little neutral detergent (non abrasive) can also be used.
Dry with a soft cloth.
Do not use flammable fluids for cleaning the appliance.
Detergent dispenser
1.
Press the release lever in the main wash compartment
downward and remove the drawer (fig. "A").
2.
Remove the cover grid from the fabric softener compartment
Remove the separator from the main wash compartment by
pulling it upward (fig. "B").
3.
Wash all the parts under running water.
4.
Refit the separator and the grid in the detergent drawer
and fit the drawer back inside its housing.
Filter
Check and clean the filter regularly, at least two or three times a year
(see "Removing the filter").
24
Advertisement
Table of Contents
