Hisense WFDJ60101 User's Operation Manual page 34

C.Fault code
The washer stops when the program is running. The display window shows
fault code "F24" , fault codes from "F04" to "F07", "F13", "F23" or "Unb".
If fault code "F24" is shown
Water level reaches overflow level.
Remove it by pressing "Start/Pause" key and feed water.
Select and start required program. If fault occurs again, disconnect power supply and
contact with after-sale service.
If fault code "F04" to "F07", "F23" shown
Electronic module fails. Press "Power Supply" key for 3 sec to turn off the machine.
After fault is removed, press "Start/Pause" key. If fault occurs again, disconnect
power supply and contact with after-sale service.
If fault code "F13" is shown
Door lock is abnormal. Start program for 20 sec and unlock the washer door (PTC) to
check whether the door is closed. Open or close it again. After fault is removed, press
"Start/Pause" key. If fault occurs again, disconnect power supply and contact with
after-sale service.
If fault code "Unb" is shown
Unbalance alarm. Press "Power Supply" key for 3 sec to turn off the machine. Open
the door and re-tidy clothes and then rotate program knob to single dehydration
mode. Spin clothes to dry again. If fault occurs again, disconnect power supply and
contact with after-sale service.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
Try to remedy the problem yourself (see "Troubleshooting Guide").
Restart the programme to check whether the problem has solved itself.
If the washing machine continues to function incorrectly, call After-Sales Service.
29