Download Print this page

Draining Residual Water - Hisense WFH8014 User's Operation Manual

Advertisement

Select the "Rinse+Spin" programme,reduce the speed to 1000rpm and strat

DRAINING RESIDUAL WATER

Before emptying the residual water, switch the appliance off and unplug it
fromthe mains socket. Remove the plinth,place a container beneath it.
1 Pull out emergency drain pipe of machine.
2 Put end of emergency drain pipe into a container.
3 Rotate emergency drain pipe plug and remove it after it becomes loose.
4 Until water runs off naturally.
5 Reinstall emergency drain pipe plug.
6 Fill detergent box with 1L water to check
emergency drain pipe.Check if there is
any leakage at connection of pipe plug.
7 Put emergency drain pipe back.
9
unds
(depends on model)
Press the release lever in the main wash compartment downward and remove
the drawer(fig."B").
Remove siphon in softener slot. (fig."C").
Refit the siphon in the detergent drawer and fit the drawer back inside its housing.
B
We recommend that you check and clean the filter regularly, at least two or three
times a year.
Ensure that the water has
1
2
Insert removal tool like slotted screwdriver into the small opening of bottom
baffle, press the bottom baffle downward with much strength and open it.
C
if it fails to perform spin cycles.
10

Advertisement

loading