Belkin Bitronics AutoSwitch Kit User Manual page 24

Table of Contents

Available languages

P73121/F1U126-KIT/EU/man.qxd

Using the Bitronics Software

Click on the port that has the mass storage device connected. In this

case, it is a Zip

entered above appears below as you had entered it. Click "OK".

Now, the Bitronics switch will always keep your computer connected to the Zip

Drive. That way, anytime you access it, you will not get any strange errors.

Then, when you print to the InkJet printer on Port B (as shown above), the

Bitronics switch will switch to Port B temporarily to send the print job, then

switch back to Port A to keep communication with the Zip

4/28/00

1:06 PM

Drive on Port A. As you can see, the "Display Name"

Page 20

(continued)

Drive.

Table of Contents

F1u126-kit