Sony SLV-788HF Operating Instructions Manual page 77

Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for VHF/UHF antenna, use the EAC-32
antenna connector (not supplied) to
connect the antenna to the VCR.
—-- 300-ohm twin
lead cable
EAC-32 Antenna
connector (not
supplied)
1 Loosen the screws on the anterifa connector.
2 Wind the twin leads around the screws on the antenna connector.
3 Retighten the screws.
Attaching a UHF/VHF band ; eine twin
mixer
lead cable
When using both 75-ohm coaxial cable
75-ohm coaxial &
cable
Loosen the screws on the mixer.
Wind the twin leads around the screws on the mixer.
Retighten the screws.
aWN = Connect the 75-ohm coaxial cable to the mixer.
Additional Information
'77