Sony SLV-788HF Operating Instructions Manual page 23

1
WN
O Set your DSS receiver
Set the RF UNIT switch to
CH 3 or CH 4, whichever IUUCcEcnocLetnt
channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 76. If >
you made A/V connections
(from page 8), you can skip
this step.
EASY SET UP
Turn on your DSS receiver.
Press EASY SET UP on the VCR.
@ The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPANOL) or French (FRANCAIS) if desired,
and press the joystick (OK). For details, see page
30.
© The CLOCK SET menu appears. Select AUTO
and press the joystick (OK). For details, see page
31.
© The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 38.
© Enter your DSS receiver code number and push
the joystick to $. For details, see page 39.
SET UP
CABLE BOX CONTROL
CABLE MOUSE
output channel (BOX
OUTPUT CH) to LINE
and press the joystick
(OK).
*ON OFF
BOX CODE NO 648,
»BOX OUTPUT CH LINE
USE </> TO SELECT CABLE
BOX CH. THEN PUSH OK
REUNIT |
CH3 CH4
CH3 CHa
oY
2
3
eo)
:
a
SET UP.
LANGUAGE
>ENGLISH
ESPANOL
FRANCAIS
NEXT OK
CANCEL EASY SET UP
SET UP
CLOCK SET
*AUTO MANUAL
SELECT : </>
NEXT : OK
CANCEL : EASY SET UP
SET UP
CABLE BOX CONTROL
> CABLE MOUSE °ON OFF
BOX CODE NO ---
BOX OUTPUT CH CH3
SELECT : </>
CANCEL : EASY SET UP
SET UP
CABLE BOX CONTROL
CABLE MOUSE
» BOX CODE NO.
BOX OUTPUT CH
ENTER YOUR CABLE BOX
CODE NO. USING 0-9 KEYS
REFER TO THE OPERATING
MANUAL FOR THE CODE
SET UP
SET UP tS DONE
Normal display
Getting Started 23