Sony SLV-788HF Operating Instructions Manual page 16

Se ea i EE TRE
Step 3: Hookups (continued)
Hookup 3 Pages 16 to 18
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
Use this hookup if you're using:
¢ VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
¢ UHF-only antenna (you get channels 14 and higher)
¢ Separate VHF and UHF antennas
Rear of TV
VHF/UHF
oh aie Take ~~©] A Match the type of
connector on your
VHF Tv: A, B, or C.
(el
or
or
VHF
'
eee erry Creer ree
4
UHF
E] Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF Match the type of
«=§0] A connector on your
TV: A, B, or C.
"re B_ For connector type:
UHE B and C, no UHF
connection is
required.
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so that you can connect the cable to the VHF/UHF
IN connector. If you have separate cables for VHF and UHF antennas, you should use
a U/V band mixer (not supplied). For details, see page 77.
16 ; Getting Started