SATO M-8485Se Service Manual page 192

Section 9. Options
Flash Memory Module Installation
INDEXING NOTCHES
APPROXIMATELY
0
45 ANGLE
INSERT THE FLASH MEMORY
MODULE INTO THE MAIN PCB
MEMORY FRAME AT
0
APPROXIMATELY 45 . NOTE THE
INDEXING NOTCH ON THE
MODULE. GENTLY PUSH DOWN TO
SNAP INTO POSITION
9-7
Figs.
9.5 Face-Out Label Sensor
Factory installed option. Top-mounted sensor for reflective "Eye-Marks" printed
on the face of the label.
SATO M-8485Se Standard Print Engine
Page 9-9
Rev. A
Service Manual