SATO M-8485Se Service Manual page 148

Replacing the Label Gap Sensor Board (Top 1/2)
REMOVE (2) SCREWS AND
WIGGLE OFF MEDIA HOLD
DOWN COVER TO EXPOSE
SENSOR ASSEMBLY
PN 9001080
Rev. A
CAREFULLY SLIDE SCREW
DRIVER THROUGH SPACE
AND REMOVE (2) SCREWS
TO DETACH SENSOR ASSY
Figs. 6-56
USE ALLEN WRENCH AND
REMOVE TO SCREWS TO
MODULE FROM BRACKET
SATO M-8485Se Standard Print Engine
Service Manual
Section 6. Replacement Procedures
SENSOR ASSEMBLY
Figs. 6-55
SENSOR ASSEMBLY
DETACH SENSOR
Fig. 6-57
Page 6-35