SATO M-8485Se Service Manual page 187

Section 9. Options
Memory PC Board Installation
REMOVE (2) SCREWS,
NUTS AND STANDOFFS.
THIS HARDWARE WILL BE
MOUNTED ON THE MAIN PC
BOARD
(STEP 1)
Fig.
9-1
CONNECTOR TO MAIN
PCB BOARD
REMOVE (2) SCREWS
AND WASHERS FROM THIS
END OF STANDOFFS
(STEP 2)
CONNECTOR TO
HOLES FOR
MEMORY BOARD
MOUNTING
Fig. 9-2
MAIN PC BOARD SHOWING WHERE THE
MEMORY BOARD WILL BE INSTALLED
Page 9-4 Rev. A
SATO M-8485Se Standard Print Engine
Service Manual