Table of Contents
Advertisement
SYNCHRO EDIT
Synchro edit allows your camera/recorder to control a compatible VCR (one that has a camera pause jack) while
tapes are being copied from the camera/recorder to the VCR.
The "REVIEW"
button on the camera/recorder
causes the VCR to start recording and the "REW", "F.FWD", "STOP" and "PAUSE" buttons cause the VCR to
stop recording.
This is convenient when you want to record only selected segments from a previously recorded tape.
Bm OND
o "AUDIO IN" (L), (R)
o "VIDEO IN"
Synchro Edit Cord
(Optional accessory)
. Connect your camera/recorder to a compatible VCR
as shown above.
An optional synchro edit cord is re-
quired,
NOTE:
If your VCR has a single (mono) audio input,
connect either the left or right audio plug to the audio
input on the VCR.
. Insert the recorded tape into the camera/recorder.
. Insert the blank tape into the recording VCR.
. Press "PLAY" button on the camera/recorder and
then press "PAUSE"
button where you want to
copy.
. Press "RECORD"
button on the VCR.
The VCR
automatically enters record/pause mode.
NOTE:
If the VCR begins to record instead of paus-
ing, you will need to change the position of the
switch on the synchro edit cord.
Stop the VCR,
change the switch, and then press ""RECORD" but-
ton on the VCR again.
. Pressing "REVIEW" button on the camera/recorder
puts the camera/recorder
in the review mode for
several seconds and then into the playback mode.
The recording VCR starts recording automatically.
E42
7. Pressing "REW", "F.FWD", "STOP" or "PAUSE"
on the camera/recorder automatically put the VCR
into the record/pause mode.
This allows you to
search (forward or backward), fast-forward or re-
wind the tape in the camera/recorder without dis-
turbing the tape in the VCR.
© To search forward (or backward), press ""F.FWD"
(or "REW")
button.
When you press "PLAY"
button, the camera/recorder will resume. normal
playback.
To
begin
copying
again,
press
"PAUSE"
button
and
then
the "REVIEW"
button.
¢ To
fast-forward
(or rewind)
the
tape,
press
"STOP" then "F.FWD" (or "REW").
To begin
copying
again, press "STOP",
then "PLAY",
then "PAUSE"
to pause the camera/recorder,
and "REVIEW" to begin copying.
Advertisement
Table of Contents
