Table of Contents
Advertisement
15.2 Call up device care
Required:The device care is
prepared.
→ "Preparing device care", page
36
Set the program to position 1.
1.
PressIron dryand hold down and set
2.
the program to level 4.
3. Iron dryletting go.
aThe display shows alternately
"CP1" and the program duration.
15.3 Carrying out simple device
care
Carry out simple device care to
remove light soiling in the device.
Comments
¡Simple device maintenance
takes approx. 1 hour.
¡The device reminds you after one
longer usage time, to carry out the
simple device care. Before the start
of the program and after the end
of the program, the display shows
the instruction "CrE" . This instruction
appears again,
simple equipment
has performed.
until you do the
atcare
Requirements
¡The appliance care is pre-
reid.
→ "Preparing device care", page
36
¡The device care has been called up
pen.
→ "Call up device care", page 37
Pour approx. 1.5 liters of warm tap water
1.
into the condensed water container.
Hold the filled condensed water
container horizontally so that no
liquid escapes.
Slide the condensed water container
2.
into the device until it clicks into
place.
OnStart/Refillto press.
3.
aThe device care starts and there
sounds a signal.
aAfter completion of the device
care, the display shows "End" and a
signal sounds.
Pull out the condensed water
4.
container horizontally and empty
it.
→
"Empty the condensed water
container", page 33
When you drain the condensed water
5.
through the drain hose:
Remove the stopper at the bottom
‒
of the condensed water container.
Place the stopper in the recess
‒
at the top of the condensed
water container.
Slide the condensed water container
6.
into the device until it clicks into
place.
Device careNL
37
Advertisement
Table of Contents
