Table of Contents
Advertisement
NLDevice care
14.2 Change basic settings
Set the program selector to
1.
position 1.
PressIron dryand at the same time
2.
turn the program selector to
position 2.
aThe display shows the current
the on.
Set the program selector to the
3.
desired position.
→ "Overview of basic settings",
page 35
PressReady into change the value.
4.
Turn off the device to save the
5.
change.
1 5 Device care
H
The appliance offers cleaning pro-
grams, for easy and intensive cleaning
of the device.
15.1 Preparing device care
Preparing the device for the
device care
Prepare the device v
ve from the device
36
ear for
care.
Requirements
¡The drum is empty.
¡The device is switched off.
Clean the lint filter.
1.
→ "Clean the fluff filter",
Page 31
Pull out the condensed water
2.
container horizontally and empty
it.
→
"Empty the condensed water
container", page 33
Prepare condensed water container
for appliance care
If you drain the condensed water via
the drain hose, prepare the
condensed water container for the
purpose of device care.
Remove the stopper from the recess
1.
in the top.
Place the stopper at the bottom.
2.
Clean the filter in the condensed water
3.
container.
Advertisement
Table of Contents
