12.5 Adding laundry
After the program has started, you can
always remove or add the laundry.
OnStart/Refillto press.
1.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry when the drum is rotating.
If you want to avoid or abort the
cooling process, open the door.
→ "Display", page 20
Open the door.
2.
Add or remove the laundry.
3.
Close the door.
4.
OnStart/Refillto press.
5.
12.6 Program Cancel
OnStart/Refillto press.
1.
Open the door.
2.
Remove the laundry.
3.
→ "Remove laundry",
page 31
12.7 Taking out laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.8 Switch off the device
The program selector onOutto
▶
make.
12.9 Fluff filter
During drying, the fluff from the
laundry is collected in the fluff filter.
The fluff filter protects the appliance
against fluff.
Clean the fluff filter
If the drying program
is or if the display
uses a prompt
the lint filter.
am
mom finished
tide
during the
gt
, then clean
Essentially the MinistryNL
Remark:If you do not clean the device
as described, the device function may
be impaired.
Requirements
¡After drying, the display shows:
"End"
¡whether the display shows during
use: .
Open the door.
1.
Remove the lint from the door.
2.
Remove the two-part lint filter.
3.
31