Related Manuals for Bosch WQG24500NL
Summary of Contents for Bosch WQG24500NL
- Page 1 Translated from Dutch to English - www.onlinedoctranslator.com Clothes dryer WQG24500NL [NL] User manual and installation instructions...
-
Page 2: Table Of Contents
Refer to the Digital User's Guide for more information. Index 1 Safety..........4 9 Programs ........ 26 1.1 General instructions ....4 9.1 Automatic programs ..26 1.2 Destination of the device 9.2 Time programs....... 27 rate ........4 10 Accessories........ 29 1.3 Restriction of users .. - Page 3 15.4 Performing simple device maintenance on the device..........37 15.5 Intensive device maintenance on the device preparing ........39 15.6 Carrying out intensive device maintenance ....... 39 15.7 Ending intensive device maintenance ......41 16 Cleaning and maintenance ..42 16.1 Tips for cleaning and the maintenance....
-
Page 4: Safety
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions †Please read this manual carefully. †Keep the operating instructions and product information for future reference. for use or for subsequent owners. †Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: †to use dryer-safe and water-washed textiles... -
Page 5: Safe Installation
SafetyNL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Connect and operate the device only in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket. - Page 6 NLSafety WARNING ‒ Risk of fire! Using an extended power cord and unauthorized adapters is dangerous. ▶ Do not use extension cords or multiple sockets. ▶ If the power cord is too short, contact customer service. ▶ Only use adapters approved by the manufacturer. WARNING ‒...
-
Page 7: Safer Use
SafetyNL ▶ Level the appliance using the appliance feet and a spirit level. There is a tripping hazard with incorrectly laid hoses and mains connection cables. ▶ Lay the hoses and connection cables in such a way that they cannot be tripped over. - Page 8 NLSafety WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. ▶ Do not install the appliance behind a door that blocks or prevents the opening of the appliance door. ▶ In the case of discarded appliances, remove the mains plug from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes.
- Page 9 SafetyNL WARNING ‒ Risk of fire! The refrigerant R290 in this appliance is environmentally friendly but flammable and can ignite on contact with open flames or ignition sources. ▶ Open flames and other ignition sources away from the hold device. WARNING ‒...
-
Page 10: Safe Cleaning And Maintenance
NLSafety The appliance may tip over when sitting or leaning on the open door. ▶ Do not sit or lean on the appliance door. ▶ Do not place any objects on the appliance door. Reaching into the rotating drum can cause injury to hands. ▶... -
Page 11: Avoiding Material Damage
Avoid material damageNL Do not use strongly alcoholic ▶ 2 Material damage cleaning agents. avoid ▶ Do not use hard scouring or dishwashing sponges. Clean the device only with water ▶ Follow this instruction to avoid and a soft, damp cloth. material damage and damage to the device. -
Page 12: Energy Saving Mode
NLSet up and connect → †Disposal of the packaging", Observe the maximum load for the Page 11 programmes. → †Programs", Page 26 Check the device for visible damage. aExceeding the maximum Open the appliance door. male load quantity extends the →... -
Page 13: Installation Site Requirements
Set up and connect 4.3 Installation site installation site Requirements requirements The device al- in a laundry borrow with the drying column original connection PAY ATTENTION! If the device is tilted more than 40°, set of the drug residual water can run out of the ger manufacturer in device and cause material damage. - Page 14 NLSet up and connect water drain hose to direct excess Pull the condensate hose from condensation water into the waste the connection. water. Comments †Use this appliance with the supplied water drain hose. If you connect the water drain hose →...
- Page 15 Set up and connectNL Push the water drain hose onto Insert the stopper into the recess the connection as far as it will go. in the top. Push in the condensed water container → Page 34 † Emptying the condensed water container →...
-
Page 16: Adjusting The Device
Set up and connect 4.5 Adjusting the device times 100 cm height confirmation To reduce noises and vibrations, level gene. the device. Remark:Of the Y-divider → Page 29 To adjust the appliance, turn the ▶ appliance feet. Check the horizontal can you replace the adjustment of the appliance with a water drain hose from... -
Page 17: Getting To Know Your Device
Getting to know your deviceNL 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color and the shape. Air intake Condensate tank →... -
Page 18: Control Panel
NLGetting to know your device 5.2 Control panel You can set all functions of your device and obtain information about the operating status via the control panel. Programs → Page 26 Program selector → Page 30 Display → Page 19 Buttons →... -
Page 19: Display
DisplayNL 6 Display The display shows the current setting values, options or information texts. Example display indication name Description Indication 0:40 Approximate expected program duration Program duration / remaining time of or time remaining in the program. the program 1:25 Time program Time program is set. - Page 20 NLDisplay name Description Indication The drying target is activated. (Closet- Drying purpose cabinet- → †Buttons", Page 23 dry) The drying target is activated. (cupboard dry Drying purpose cabinet- → †Buttons", Page 22 Plus) dry Plus Drying target The custom drying target has been activated. →...
- Page 21 DisplayNL name Description Indication Program status Drying purpose cabinet- Program status Anti wrinkle ( Start/ Pause Program status Pause) Program end Program status Example...
-
Page 22: Buttons
NLButtons 7 Buttons Here you will find an overview of the buttons and their setting options. Knob Description Choise Start/ Pause †start Start program, an- zero or pause. †Cancel †pause 3 sec. †activate Activate or deactivate the child lock. †deactivate The control panels secure against accidental operation. - Page 23 ButtonsNL Knob Description Choise †Cupboard Dry †With the selection Cabinet- Cupboard Dry †1 dry, the drying target is activated. †2 †3 Laying the drying target determine how damp or dry the laundry is at the end of the programme → †drying target", Page 25 †With the selection +1 ,...
- Page 24 NLButtons Knob Description Choise Low temperature †activate Activate soft drying or deactivate. †deactivate The temperature becomes lowered for sensitive textiles, e.g. for polyacrylic or elastane. The program duration is extended. †Program end †The program end Ready in capture. †Program duration The program duration is already included in the set number of...
-
Page 25: Drying Target
Drying targetNL 8 Drying target A drying target is specified for each automatic programme. The drying target determines how dry or damp your laundry is after the program has ended. laundry Drying result Drying target The laundry is dry. Multi-layer thick laundry Cupboard Dry Plus that dries hard. -
Page 26: Programs
NLPrograms 9 Programs You can dry your textiles with either an automatic program or a timed programme. 9.1 Automatic programs Tips Automatic programs in which moisture sensors measure the †Choose the drying target according to residual moisture of the laundry adjust the textile or the desired during drying. -
Page 27: Time Programs
ProgramsNL Program Description max. bela- thing (kg) †To distribute the filling and retain moisture To remove buildup, shake the textiles at the end of the program. Hygiene Plus Dry sturdy and boil-resistant textiles made of cotton and linen. Dry sturdy and boil- resistant textiles made of cotton and linen. - Page 28 NLPrograms Time program Description max. bela- thing (kg) Remove the laundry at the end of the program and let it dry. Time program warm Dry all textiles except wool and silk. Suitable for pre-dried or slightly damp laundry and for post-drying multi-layered, thicker laundry.
-
Page 29: Accessories
accessoriesNL 10 Accessories Only use original accessories. These are adapted to the device. Remark:Some accessories are available in other colours. Contact the → †Customer Service", page 49 † Usage Order number Device space saving WTZ27410 Connection set run on a suitable washing machine of the same the manufacturer and with the same width and... -
Page 30: Laundry
QR code found in the digital operating in the table of contents or on instructions by scanning the QR code www.bosch-home.com. in the table of contents or on www.bosch-home.com. 11.1 Preparing the laundry 12.1 Switch on device... -
Page 31: Starting The Program
ServiceNL Remove the laundry. 12.4 Starting the program 12.8 Switching off the device Remark:If you want to change the time ▶ Turn the program selector onOutto until the program end, first set the make. ready in time. Start/ Pauseto press. ▶... - Page 32 NLService Remove the two-piece fluff filter. Open both fluff filters. Remove the fluff. Remove the fluff from the recess. Thoroughly clean both fluff filters with running warm water and dry Make sure that no fluff falls into them. the air duct. Detach the two-piece fluff filter.
-
Page 33: Condensate Tank
ServiceNL Close the two fluff filters and plug Empty the condensation container them together. When the drying program has finished or if the display shows a message during use, empty the condensed water container. Requirements †The display shows after drying: "end"... -
Page 34: Child Lock
NLChild lock Push in the condensation container Required:The condensed water container → Page 33 has been removed from the device. Push in the condensed water ▶ container as far as it will go. 13 Child lock Secure your device against unwanted operation via the controls. -
Page 35: Basic Settings
Basic settingsNL 14 Basic Settings You can configure the basic settings of your device according to your needs. 14.1 Overview of the basic settings Program- Description Basic setting Where the ling position Signal 0 (off) Adjust the volume of the signal 1 (soft) after the program has ended. -
Page 36: Changing Basic Settings
NLDevice maintenance Remove the laundry. 14.2 Changing basic settings Set the program selector to position 1. Close the appliance door. Pull out the condensed water container horizontally. PressIron dryand at the same time turn the program selector to position 2. aThe display shows the current value the on. -
Page 37: Preparing The Condensate Container For Device Maintenance
Device maintenanceNL 15.2 Preparing the condensate 15.3 Device maintenance container for device start maintenance Requirements †The appliance is prepared for Remark:If the condensation water is the device maintenance. drained away with the drain hose, the → †Preparing the device for device condensation water container must be maintenance", prepared before simple or intensive... - Page 38 NLDevice maintenance maintenance. The display shows the Press Start/Pause . tip "CrE" for 5 seconds before the start aThe device maintenance starts and there and after the program has ended. The a signal sounds. note is displayed several times until aThe display shows "End"...
-
Page 39: Intensive Device
Device maintenanceNL Push in the condensed water Requirements †The appliance is prepared for container until it locks into place. the device maintenance. → †Preparing the device for device maintenance", Page 36 †Device maintenance has started. → †Start device maintenance", page 37 Press. - Page 40 NLDevice maintenance A bottle of the original care Pull out the condensed water product container horizontally and empty → †Accessories", Page 29 and fill approx. 1 ½ liters of warm tap water into the condensate container. Approx. Fill 1 liters of warm tap water into the condensate container.
-
Page 41: Ending Intensive Device Maintenance
Device maintenanceNL Carefully tilt the condensed water Push in the condensed water container horizontally and empty it container until it locks into place. to remove the remnants of the original care product. Press Start/Pause . aThe device maintenance is continued. After the end of the device maintenance, the display 15.7 Ending intensive device shows "End"... -
Page 42: Cleaning And Maintenance
QR code PAY ATTENTION! in the table of contents or on Hard or rough objects can damage www.bosch-home.com. the humidity sensor. Do not use hard or rough objects, ▶ abrasives or steel wool for cleaning. -
Page 43: Filter Of The Condensed Water
Cleaning and maintenanceNL Open the door. Remove the filter. Clean the humidity sensor with a sponge. Clean the filter with running warm water or in the dishwasher. Push in the filter as far as it will 16.3 Filter of the condensed water container During drying, fluff from the laundry ends up in the condensation water. -
Page 44: Troubleshooting
NLTroubleshooting 17 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only qualified personnel may carry out repairs on the device. ▶... - Page 45 TroubleshootingNL Cause and Troubleshooting Malfunction device pauses, Cooling process active. but the drum No error - no action required. ▶ running. wrinkling. The load quantity is too high. Pay attention to the maximum load of the ▶ → †Programs", Page 26 † The laundry is left in the drum for too long after drying.
- Page 46 NLTroubleshooting Cause and Troubleshooting Malfunction Buzzing sound. Compressor venting active. No error - normal operating noise. ▶ Fluff filter is dirty. Drying time is too long. → †Cleaning the fluff filter", Page 31 ▶ Ambient temperature is higher than 30°C. Make sure the ambient temperature is below 30°C.
- Page 47 TroubleshootingNL Cause and Troubleshooting Malfunction Laundry is too damp. Warm laundry feels damper than it actually is at the end of the program. Remove the laundry from the drum immediately after drying. Spread out the items to let them cool. Inappropriate drying target set.
-
Page 48: Transporting, Storing And Drain
NLTransport, storage and disposal Secure the water drain hose on the 18 Transport, on- device against unintentional hit and drain loosening. Make sure that the water Here you will find an explanation of drain hose is not kinked. how to prepare the device for Emptying the condensed water container →... -
Page 49: After-Sales Service
customer serviceNL Make sure that the pipes of the ▶ Detailed information about the warranty cooling circuit are not damaged. period and warranty conditions in your country can be obtained from our after- Unplug the power cord from the sales service, your dealer or on our outlet. -
Page 50: Consumption Values
NLConsumption values 20 Consumption values The program Cotton eco Depending on the type of textile, the (indicated by "arrow") is suitable for composition of the laundry to be dried, drying cotton laundry with normal residual moisture in the textile, the humidity and from the point of view of degree of drying selected, the amount of the combined energy consumption for... -
Page 51: Technical Data
Technical dataNL End- Out- Pro- Program bela- centri- energy- gangly gram- fugue thing gibberish moisture (kg) maduur revving vigilance moisture † (h:min) (kWh/ vigilance number (t/ min) † cycle) 1:34 1.03 Cotton + Iron Dry 12.0 † 1:00 0.55 wrinkle resistant Cupboard Dry †... - Page 52 Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Strasse 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company * 9001690960* 9001690960†020301)