Yamaha MTM690 Owner's Manual page 25

TIP
If traveling at speeds under 20 km/h
(12 mi/h), "_ _._" is displayed.
Average fuel consumption
ZAUM1336
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L",
"AVE_ _._ L/100 km" or "AVE_ _._
MPG" (for the UK).
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km.
 "AVE_ _._ MPG" : The average
distance that can be traveled on
1.0 Imp.gal of fuel.
To switch the average fuel consump-
tion display settings, push the bottom
set button for two seconds.
To reset the average fuel consumption,
push the top set button for one sec-
ond.
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until
1
the vehicle has traveled 1 km (0.6 mi).
Coolant temperature
ZAUM1337
1. Coolant temperature display
3-10
Instrument and control functions
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message "HI" flashes, stop the
vehicle, then stop the engine and let
the it cool. (See page 6-39.)
TIP
 When the coolant temperature is
below 40 °C, "Lo" will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
1
ZAUM1338
1. Air temperature display
3
1