Yamaha MTM690 Owner's Manual page 24

Instrument and control functions
stantaneous fuel consumption "km/L",
"L/100 km" or "MPG", average fuel
consumption "AVE_ _._ km/L", "AVE_
_._ L/100 km" or "AVE_ _._ MPG",
coolant temperature "_ _ °C", and am-
bient temperature, and "Air_ _ °C", and
3
clock "_ _:_ _" in the following order:
ODO → TRIP 1 → TRIP 2 → km/L,
L/100 km or MPG → AVE_ _._ km/L,
AVE_ _._ L/100 km or AVE_ _._ MPG →
_ _ °C → Air_ _ °C → Clock _ _ :_ _ →
ODO
TIP
 Push the top set button to switch
the display in the reverse order.
 The fuel reserve tripmeter and er-
ror code displays come on auto-
matically, while the brightness
control mode is accessed sepa-
rately.
If the lower segment and frame of the
fuel meter start flashing, the display
automatically changes to fuel reserve
tripmeter "TRIP F" and starts counting
the distance traveled from that point. In
this case, push the bottom set button
to switch the display between the vari-
ous tripmeter, odometer, and fuel con-
sumption modes in the following order:
TRIP F → km/L or L/100 km → AVE_
_._ km/L or AVE_ _._ L/100 km → _ _
°C → Air_ _ °C → Clock _ _ :_ _ → ODO
→ TRIP 1 → TRIP 2 → TRIP F
For the UK :
TRIP F → km/L, L/100 km or MPG →
AVE_ _._ km/L, AVE_ _._ L/100 km or
AVE_ _._ MPG → _ _ °C → Air_ _ °C →
Clock _ _ :_ _ → ODO → TRIP 1 →
TRIP 2 → TRIP F
To reset a tripmeter, select it by push-
ing the bottom set button, and then
push the top set button for one sec-
ond.
If you do not reset the fuel reserve trip-
meter manually, after refueling and
traveling 5km (3mi) it resets automati-
cally and disappears from the display.
3-9
Instantaneous fuel consumption
ZAUM1335
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either "km/L" or
"L/100 km"; or for the UK, "MPG" or
"km/L" or "L/100 km".
 "km/L": The distance that can be
traveled on 1.0 L of fuel under cur-
rent riding conditions.
 "L/100 km": The amount of fuel
necessary to travel 100 km under
current riding.
 "MPG" : The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der current riding conditions.
To switch the instantaneous fuel con-
sumption display settings, push the
bottom set button for two second.
1