Table of Contents
Advertisement
Malfunction
A Check Control message is displayed.
The Automatic Parking Assistant has malfunc-
tioned. Have the vehicle checked by an author-
ized service center or another qualified service
center or repair shop.
Back-up assistant
Principle
The Back-up Assistant assists when driving in
reverse, for instance when driving out of tight
or confusing parking or street situations.
General information
The vehicle stores the driving movements of
the last distance covered. This stored distance
can be driven in reverse with automated steer-
ing.
The system takes over the steering. The speed
must be controlled by the driver using the ac-
celerator pedal and the brake.
A maximum of 164 ft/50 m are stored.
Follow the information in the "Parking assis-
tance systems" chapter.
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Online Edition for Part no. 01405A7D166 - II/23
Parking
Warning
The system can steer the vehicle over or
onto curbs. There is a risk of injury or risk
of damage to property. Watch surrounding
traffic closely and actively intervene where
appropriate.
Functional requirements
▷
Drive forward without interruption to store
the distance covered.
▷
To store the distance covered, do not drive
faster than 22 mph/35 km/h.
▷
Dynamic Stability Control is activated.
Driving in reverse with automated
steering
1.
Turn on drive-ready state.
2.
With the vehicle at a standstill, press
button or engage reverse gear.
The parking assistance systems view is
displayed.
3.
"Back-Up Assistant"
Follow the instructions on the control dis-
play where required.
4.
Take your hands off the steering wheel and
carefully drive in reverse with the accelera-
tor pedal and the brake.
Green: the system takes control of
steering.
When driving in reverse, observe the vehi-
cle's surroundings.
In case of obstacles, stop immediately and
take over control of the vehicle. Follow the
instructions for Park Distance Control.
5.
Right before the end of the stored distance
covered, a signal tone will sound and a
message is displayed.
CONTROLS
241
OwnersManuals2.com
Advertisement
Table of Contents
