Table of Contents
Advertisement
Turning the automatic camera
perspective on/off
Turning the camera view on/off
automatically
When the parking assistance systems' display
is turned on, automatic camera perspective is
selected automatically.
The icon in the selection window is selected
automatically.
To exit the steering-dependent camera view,
select another camera view in the selection
window.
Turning the camera view on/off
manually
1.
Press the button.
2.
Select the icon in the selection window.
To exit the steering-dependent camera
view, select another camera view in the se-
lection window.
Side protection
Principle
The side Park Distance Control is automati-
cally displayed when the automatic camera
perspective is turned on. The function shows
obstacles located next to the vehicle.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Online Edition for Part no. 01405A7D166 - II/23
Parking
Display
To protect the sides of the vehicle, obstacle
markings are displayed on the sides of the ve-
hicle.
▷
No markings: no obstacles detected.
▷
Color marks: warning against detected ob-
stacles.
System limits
The system only displays stationary obstacles
that were previously detected by sensors while
passing them.
The system does not detect whether an obsta-
cle moves later on. For this reason, at stand-
still, the marks are not shown anymore in the
display after a certain time. The area next to
the vehicle must be newly captured.
Side view
Principle
Side view shows the vehicle's side surround-
ings, making it easier to position the vehicle at
the curb or with other obstacles on the side.
The side view looks from rear to front and, in
case of danger, focuses automatically on pos-
sible obstacles.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
CONTROLS
229
OwnersManuals2.com
Advertisement
Table of Contents
