Tools Needed; Loose Parts List - RIDGID R4222T Operator's Manual

TOOLS NEEDED

The following tools (not included) are needed for making adjustments or installing the blade:
COMBINATION WRENCH
8 mm, 10 mm, 13 mm
COMBINATION SQUARE
LOOSE PARTS
The following items are included with your miter saw:
 Dust Bag and Frame Assembly
 Work Clamp
 Blade
DUST BAG/FRAME
ASSEMBLY
WARNING:
The use of attachments or accessories not listed might be hazardous and could cause serious personal injury.
 Blade Wrench/Hex Key
 Sliding Miter Fences (2)
 Operator's Manual (not shown)
WORK CLAMP
BLADE WRENCH/HEX KEY
FLAT HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
FRAMING SQUARE
13 - English
HEX KEY
4 mm
Fig. 7
BLADE
SLIDING
MITER FENCES
Fig. 8