Table of Contents
Advertisement
Setting up the Equipment type
The TC300 is designed to control Fan coil units. It can control 4 pipe dual coil, 4 pipe
single coil, and 2 pipe single coil.
16. Tap Equipment and set the equipment details. See
17. Tap I/O Assignment and assign the I/Os. See
18. Tap the right arrow button.
The System Switch screen appears.
Setting up the System switch
The operation mode of system switch depends on the equipment configuration.
Boot-up the thermostat
Figure 11 Equipment and I/O
Equipment
I/O terminal
Figure 12 System Switch
BOOT-UP THE THERMOSTAT
configuration.
assignment.
39
Advertisement
Table of Contents
