Channel Map (How Channels Map To Machines); Bank Dump; Reverse Bank Dump (Bank "Load"); Continuous Controllers - Harman Lexicon PCM96 Surround Owner's Manual

Channel Usage
Base Channel System Level
Base + 1 Virtual machine 1
Base + 2 Virtual machine 2
Base + 3 Virtual machine 3
Base + 4 Virtual machine 4
26
the unit. You can connect up to three PCM96 Surround units to a single
MIDI device.
To assign a base channel to the PCM96 Surround:
Press the Back button until the Preset screen appears.
Press the Machine button until System View is displayed.
Press the Select knob to enter the System Menu.
Turn the Select knob until Midi Control is highlighted.
Press the Select knob to access the Midi Control Menu.
Turn the Select knob until Base Channel is highlighted.
Turn Knob B to select the base channel (0-15).
Press the Back button twice to return to the Preset screen.
Now the PCM96 Surround unit is identified by the selected base channel,
and virtual machines 1, 2, 3, and 4 within the PCM96 Surround are identi-
fied by the base channel plus 1, 2, 3, and 4, respectively.

CHANNEL MAP (HOW CHANNELS MAP TO MACHINES)

Description
Use for loading System presets. This is the PCM96 unit's base channel. The
next four channels apply to this PCM96 unit's virtual machines.
Changes parameters in one virtual machine in a System preset on the PCM96
unit with base channel 0. Use for loading machine presets and changing
parameters for machine #1.
Changes parameters in one virtual machine in a System preset on the PCM96
unit with base channel 0. Use for loading machine presets and changing
parameters for machine #2.
Changes parameters in one virtual machine in a System preset on the PCM96
unit with base channel 0. Use for loading machine presets and changing
parameters for machine #3.
Changes parameters in one virtual machine in a System preset on the PCM96
unit with base channel 0. Use for loading machine presets and changing
parameters for machine #4.

BANK DUMP

The Bank Dump feature lets you copy all the presets in a User bank from
one PCM96 Surround to another (or to another MIDI device). See "MIDI
Control" on page 22 for information about Bank Dump.

REVERSE BANK DUMP (BANK "LOAD")

You can perform a "reverse bank dump" by recording a bank dump to your
MIDI sequencer, then playing that sysex back to the PCM96 Surround to
restore the bank.

CONTINUOUS CONTROLLERS

All PCM96 Surround soft row parameters can be controlled with single,
7-bit controllers. Each parameter is controlled with the full controller range,
regardless of the parameter range. For example, if the controller is at the
midpoint of its range (64), the parameter will also be at the midpoint of its
range no matter what the actual number.