Storing A Preset - Harman Lexicon PCM96 Surround Owner's Manual

STORING A PRESET

Once you've edited a preset, you can store it on the PCM96 Surround (in
the User category) or on a Compact Flash card (in the Card category).
Note: When you first insert a Compact Flash card, you may receive
the message "Card Needs Initializing." See "Initializing/Formatting a
Compact Flash Card" on page 12 for instructions on how to initial-
ize a Compact Flash card.
1. From the Preset screen, press the Store button. The Save As screen
appears.
Select Knob -> Change Position
ʻAʼ Knob -> Change Letter
Save As: Single Stereo Config
2. Turn the Select knob to select a letter to change.
3. Turn Knob A to change the selected letter.
Press Knob A to toggle between uppercase, lowercase, special characters
and numbers.
Press Knob B to enter a space.
Press Knob C to backspace.
4. Repeat steps 2 and 3 until you've changed all the letters you want to
change.
5. Press the Select knob to continue. If a Flash card is inserted, the
Location menu appears. (If no Flash card is inserted, skip to step 8.)
User
Card
6. Turn the Select knob to select a location. "User" is the PCM96
Surround built-in memory; "Flash" is the inserted Compact Flash card
(if one is present).
7. Press the Select knob to continue. The numbered list appears.
0:- Empty -
1:- Empty -
2:- Empty -
3:- Empty -
4:- Empty -
8. Turn the Select knob to select a slot in the numbered list. The preset's
name automatically appears in the selected slot.
9. Press the Select knob to save the preset to the selected slot. "Storing
Preset" appears briefly in the Display and you are returned to the Preset
screen.
11