Selecting Your Audio Source And Clock Source; Loading A Preset; Changing Categories - Harman Lexicon PCM96 Surround Owner's Manual

SELECTING YOUR AUDIO SOURCE AND CLOCK SOURCE

1. Press the Machine button until the words "System View" appear in the
Display.
1:ConcertHall->Flange 1:Single Stereo Config
(System View) (System View)
2. Press the Select knob. The System Menu appears.
System Menu
+Audio Setup
+Machine Config
+MIDI Control
3. With Audio Setup highlighted, press the Select knob. The Audio Setup
menu appears.
|:Audio Setup
Audio Source: ANALOG
Clock Source: INTERNAL
Clock Rate: 48KHz (Lock)
4. Turn Knob A to select your audio source (Analog or AES).
5. Turn Knob B to select your wordclock source (Internal, AES, or BNC).
6. Press the Back button twice to save your changes and return to the
Preset screen.

LOADING A PRESET

1. From the Preset screen, turn the Select knob to scroll through the avail-
able presets in the current category. (Presets are arranged in categories
within the PCM96 Surround; see Changing Categories below for more
information.) The preset name blinks after you turn the Select knob,
indicating that you are in preset selection mode.
2. Press the Select knob to load the preset you've selected. The display
briefly reads Loading Preset, and the preset name appears. It is no longer
blinking.

CHANGING CATEGORIES

Presets are grouped into categories in the PCM96 Surround. Each category
has its own set of presets. When you turn the Select knob while viewing a
preset, you only see presets available in the current category.
System Presets and Machine Presets each have their own set of catego-
ries. System Preset categories are based on DSP configurations (see "DSP
Configurations" on page 13), and Machine Preset categories are based on
algorithms (see "The Algorithms" on page 30).
96 48
Version 1.0
48
48
A
B
C
7