Table of Contents
Advertisement
10
0:Med Hall
0:Med Hall
1:PreDelay
1:PreDelay
2:MidRT
2:ReverbTime
3:RvbOutFreq
3:RvbOutFreq
Press the Machine button repeatedly to cycle through the virtual machines in
a System Preset, and eventually back to the System Preset.
EDITING A PRESET
To edit a System Preset, you must edit the virtual machines within it. Press
the Machine button to cycle through the virtual machines within a System
Preset.
Each virtual machine contains a set of parameters that you can edit and
adjust. When a virtual machine is selected, three of its parameters appear at
the bottom of the Display. Adjust the first parameter with Knob A, the sec-
ond parameter with Knob B, and the third parameter with Knob C. To see
the next set of parameters you can adjust, press Knob A.
0:Med Hall
1:PreDelay
2:MidRT
3:RvbOutFreq
Soft Row Parameters
Each virtual machine has 8 parameters you can adjust this way. All presets
have more than 8 parameters, but only 8 can be edited via the A, B, and C
knobs in this fashion. You can choose which parameters are in the list by
using the Soft Row Setup menu located in the Machine menu (see "Machine
Menu" on page 24 for more information).
:14ms
:14ms
:1.59s
:1.59s
:4750.0Hz
:4750.0Hz
Configuration Icon
(Machine Preset)
:14ms
:1.59s
:4750.0Hz
48
48
Advertisement
Table of Contents
