Table of Contents
Advertisement
Back to Contents Page
Wireless Mini-Card(s)
Dell™ Inspiron™ 1120 Service Manual
Removing the Mini-Card(s)
Replacing the Mini-Card(s)
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
CAUTION:
in the safety instructions that shipped with your computer).
NOTE:
Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Your computer has one full Mini-Card slot and one half Mini-Card slot:
One full Mini-Card slot — supports Mobile broadband or Wireless Wide Area Network (WWAN), GPS, or TV tuner module
l
One half Mini-Card slot — supports Wireless Local Area Network (WLAN), WLAN/Bluetooth
l
(WiMax)
NOTE:
Depending on the configuration of the computer when it was sold, the Mini- Card slots may or may not have Mini-Cards installed in them.
Removing the Mini-Card(s)
1. Follow the instructions in
2. Remove the battery (see
3. Remove the keyboard (see
4. Follow the instructions from
5. Remove the palm rest (see
6. Disconnect the antenna cables from the Mini-Card.
7. Remove the screw that secures the Mini-Card to the system board.
NOTE:
Your computer can only support either one WWAN Mini-Card or one TV Tuner card in the full Mini-Card slot at a time.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"
Before You
Begin.
Removing the
Battery).
Removing the
Keyboard).
step 4
to
step 6
in
Removing the Hard
Removing the Palm
Rest).
UserManuals.info
Removing the
Battery) before working inside the
®
combo, or Worldwide Interoperability for Microwave Access
Drive.
Advertisement
Table of Contents
