Display Bezel - Dell P07T002 Service Manual

1 display assembly
Replacing the Display Assembly
1. Follow the instructions in
2. Place the display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
3. Connect the display cable to the system board connector.
4. Route the Mini-Card antenna cables through the routing guides on the computer base.
5. Connect the Mini-Card antenna cables to the Mini-Card(s).
6. Replace the palm rest (see
7. Follow the instructions from
8. Replace the keyboard (see
9. Replace the battery (see
CAUTION:
result in damage to the computer.
Display Bezel
Removing the Display Bezel
CAUTION:
1. Follow the instructions in
2. Remove the display assembly (see
3. Remove the two rubber pads covering the screws on the display bezel.
4. Remove the two screws that secure the display bezel to the display back cover.
5. Using your fingertips, carefully pry up the inside edges of the display bezel to remove it from the display back cover.
Great user manuals database on
2 screws (2)
Before You Begin.
Replacing the Palm Rest).
step 5 to step 7 in Replacing the Hard
Replacing the Keyboard).
Replacing the Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
Before You Begin.
Removing the Display
UserManuals.info
Drive.
Assembly).