Machine Is In Rinse Hold Mode; End Of Programme - Beko WMB 81252 LC Manual

C
If you want to open the loading door after
you have cancelled the programme but it
is not possible to open the loading door
since the water level in the machine is
above the loading door opening, then
turn the Programme Selection knob to
Pump+Spin programme and discharge
the water in the machine.

Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol
illuminates when the machine is in Rinse Hold
mode.
If you want to spin your laundry when the
machine is in this mode:
Adjust the spin speed and press Start /
Pause / Cancel button. Pause symbol
disappears and Start symbol appears.
Programme resumes, discharges the water
and spins the laundry.
If you only want to drain the water without
spinning:
Just press Start / Pause / Cancel button.
Pause symbol disappears. Start symbol
appears. Programme resumes and
discharges the water only.

End of programme

"End" appears on the display at the end of
the programme. Symbols of the programme
steps remain lit. Auxiliary function, spin speed
and temperature that were selected at the
beginning of the programme remain selected.
23
EN