Loading Door Lock; Changing The Selections After Programme Has Started; Child Lock; Canceling The Programme - Beko WMB 81252 LC Manual

be active or the automatic unbalanced
load detection system might be activated
due to the unbalanced distribution of the
laundry in the machine.

Loading door lock

There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
Door Locked symbol appears when the
loading door is locked. This symbol will flash
until the loading door becomes ready to open
when programme completes or the machine
is paused. Do not force to open the loading
door in this step. Symbol disappears when
the door is ready to open. You can open the
door when the symbol disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to
switch the machine to pause mode. Pause
symbol appears on the display indicating
that the machine is paused. Start symbol
disappears.
F1 F2
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
1. Press the Start / Pause / Cancel button
to switch the machine to pause mode.
The programme follow-up light of the
relevant step during which the machine
was switched into the pause mode will
flash.
2. Wait until the Loading Door can be
opened.
3. Open the Loading Door and add or take
out the laundry.
4. Close the Loading Door.
F3
F4
22
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button to
start the machine.
C
The loading door will not open if the
water temperature in the machine is
high or the water level is above the door
opening.

Child Lock

Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C
You can switch on and off the machine
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2 and 4
nd
buttons for 3 seconds. "Con" appears on the
display.
C
Same phrase will appear on the display if
you press any button when Child Lock is
enabled.
To deactivate the Child Lock:
Press and hold 2 and 4
nd
buttons for 3 seconds. "COFF" appears on
the display.
C
Do not forget to disable the child lock
at the end of the programme if it was
enabled before. Otherwise, machine will
not allow to select a new programme.

Canceling the programme

Press and hold Start / Pause / Cancel button
for 3 seconds. Start symbol flashes. Symbol
of the step at which the programme was
cancelled remains lit. " END " appears on the
display and the programme is cancelled.
EN
Auxiliary Function
th
Auxiliary Function
th